Linux Distributions for Orange PI H3 boards

loboris · Published in 2015-9-4 04:38:03

blindpet replied at 2015-9-3 21:08
Point taken and post edited, clearly I'm still (understandably) angry about it ;)

Here is the Ora ...

Thanks for the link. Nice work.

Vladimir55 · Published in 2015-9-4 14:26:47

Dear loboris!
I have wi-fi module USBtoWi-FI,
"sudo nmcli -a d wifi connect"
It works well with your build in mode "station" 150 Mb
AP mode is possible ?
there are instructions ?
thank.

Niarbagem · Published in 2015-9-4 14:55:25

blindpet replied at 2015-9-4 02:11
The gigabit port is limited to 480 Mbit so you won't get those 90MB/s you want over the gigabit ju ...

It's soft or hard limitation?
May be exists another driver?!
But 480 MBit it is 2 times more than I have now.

Niarbagem · Published in 2015-9-4 15:04:11

blindpet replied at 2015-9-4 02:13
I don't deal with ODROID, they stole my content and published it in their magazine without my conse ...

I want board with SATA3 USB3.0, Gigabit network, 2 GB RAM, 4 cores 1,5 - 2 GHz with no fan cooling.
Something like this but 4 cores. But low cost

goldenfenix · Published in 2015-9-4 16:52:33

little question audio working only from hdmi on ubuntu or from jack 3.5 too.

blindpet · Published in 2015-9-5 03:43:29

Niarbagem replied at 2015-9-4 14:55
It's soft or hard limitation?
May be exists another driver?!
But 480 MBit it is 2 times more than ...

The same limitation exists on other units, I believe it is a hard limitation as it runs along the USB 2 bus which has a theoretical max of 480 Mbit

That Minnow does look cool but they are way overpriced.

Sitheek · Published in 2015-9-5 15:30:31

Edited by Sitheek at 2015-9-6 05:26

OK, PEOPLE DO NOT CONNECT CSI CAMERAS TO ORANGE PI 2 BOARD BECAUSE INVERTED PINOUTS!!!

(many thanks to @mikexx for finding this)

You can use CSI camera if you connect ribbon tape extender and inverse pinouts (connect it in other direction).
You do not need any tricks with gpio-sunxi, everything is controlled by vfe_sunxi modules. TWI2 port in script.bin has to be set to not used !!!

We have succeded in connecting OV5640 - camera comunicates with board

@loboris - we have some issues with vfe_v4l2 driver, preventing us from getting some pictutes or video from camera. We would be grateful if you could help us with this. We can send you our adapter to inverse pinouts - It would be faster(if you live in europe) than getting it from aliexpress. Of course you can build such adapter yourself

. Please kindly let me know by PM.

camh · Published in 2015-9-6 17:17:32

Thanks for all the work you've done on this, loboris.

Could I ask that you also provide a defconfig for the kernel(s) you're building? (as in "make savedefconfig").

I am looking at what needs to be done to forward port the sunxi drivers from the 3.4 kernel (and 2011.9 uboot) sources to mainline. It would really help if I could see what configuration produces a working kernel for the 3.4 allwinner sources.

magicse · Published in 2015-9-7 02:19:51

Edited by magicse at 2015-9-6 20:26

loboris replied at 2015-9-3 19:53
Only 2.4, Realtek RTL8198ETV, specification

Good day Loboris.
I try build for example tv.ko module but I can't get the same 0xa1136ef1 module_layout, like Your and like original from Steve Lubuntu.
Ang get - > disagrees about version of symbol module_layout
Could You help me with it?

Orangepi2mini · Published in 2015-9-7 04:15:08

Edited by Orangepi2mini at 2015-9-9 23:52

Hello everyone!

Lubuntu 15.04 with LXDE/Lubuntu Desktop works great on Orange pi 2 mini, but ethernet doesn'twork

dmesg | grep eth0 gives following information

[14.609962] gmac0 gmac0: eth0: Initialize hardware error
[14.866079] gmac0 gmac0: eth0: eth0: PHY ID 0000ffff at 0 IRQ poll (gmac0-0:00)
P.S. Nevermind! I solved problem...