Openelec Build for OPI PC and 2 now with HW decoding

jernej · Published in 2016-3-29 04:46:15

kigm replied at 2016-3-28 21:30
No, if I try build 3/09 and 3/22 both are not working. Now I downloaded the image and flashed but ...

That would explain. Images default to 1080p. You have to change script.bin to 720p. Do you know how to do that?

Devs can get source on my github page, which is linked in FAQ topic.

kigm · Published in 2016-3-29 05:11:13

jernej replied at 2016-3-29 04:46
That would explain. Images default to 1080p. You have to change script.bin to 720p. Do you know ho ...

I know that I should modify with fex2bin script.bin and the inverse process, but I don't know which lines change. Can you help me?

jernej · Published in 2016-3-29 05:24:59

kigm replied at 2016-3-28 22:11
I know that I should modify with fex2bin script.bin and the inverse process, but I don't know whic ...

In line "screen0_output_mode = 10", chage "10" to:
4 for 720p @ 50Hz
5 for 720p @ 60Hz

kigm · Published in 2016-3-29 05:48:26

jernej replied at 2016-3-29 05:24
In line "screen0_output_mode = 10", chage "10" to:
4 for 720p @ 50Hz
5 for 720p @ 60Hz

Yes! now it's working although I have been modify screen0_mode and screen1_mode to 4. Thank you!

kigm · Published in 2016-3-29 07:24:35

How can I add software to OpenElec img? like transmission, apache, vlc...

I saw OpenElec doesn't support install software but have to exist a way for do that

jernej · Published in 2016-3-29 13:09:24

Edited by jernej at 2016-3-29 16:39

kigm replied at 2016-3-29 00:24
How can I add software to OpenElec img? like transmission, apache, vlc...

I saw OpenElec doesn't su ...

There is OpenELEC software repository, from which you can install software. Unfortunatelly, it is architecture dependant and it doesn't support H3 architecture (after all, this fork is unofficial). AFAIK, only one user in FAQ section provided repository for some programs. You can check his or try to bring up your own. Basically, you have to compile it yourself.

kigm · Published in 2016-3-29 22:17:30

jernej replied at 2016-3-29 13:09
There are actually OpenELEC software repository, from which you can install software. Unfortunatel ...

Thank you for information! I'll see what I can do when I'll have time

pepe01 · Published in 2016-3-30 05:54:52

Hi,

This version supports the driver PCM512x OpenELEC ?. I want to connect this dac to orange pc pi.

http://www.dx.com/es/p/pifi-digi ... 363003#.Vvrz9eZvHAw

I've tried multiple configurations and none of them work. The driver is not loaded into the kernel ..

thanks, excuse my English..

Unoqueva · Published in 2016-3-30 06:11:48

pepe01 replied at 2016-3-29 22:54
Hi,

This version supports the driver PCM512x OpenELEC ?. I want to connect this dac to orange pc pi ...

orange pi gpio is different from the raspberry gpio, i2s the bus pins are in different sites.

I only seen work the bus i2s with this image.
http://www.diyaudio.com/forums/p ... -4.html#post4614528

pepe01 · Published in 2016-3-30 20:39:03

Unoqueva replied at 2016-3-30 06:11
orange pi gpio is different from the raspberry gpio, i2s the bus pins are in different sites.

I o ...

Yes, it is different, 27 LRCK, 28 MCLK y 37 DOUT, but not work. I tried that image and no work.
You dac what you have and what your pinout?

Thanks